BARANI DESIGN at the Meteo Expo in Russia to showcase the MeteoHelix®, MeteoWind®, MeteoShield®

BARANI DESIGN Technologies AWOS weather station at 2000 metres in High Tatra mountains

Professional IoT weather stations and sensors conforming to World Meteorological Organization (WMO) standards from BARANI DESIGN Technologies are on display in the red show stand number 108 at the WEATHER • CLIMATE • WATER / EARTH OBSERVATIONS / GREEN ECONOMY 2019 expo in St. Petersburg, Russia today and tomorrow.

The meteorological instrument exhibition is taking place in parallel with the annual meeting of the Intergovernmental Council on Hydro-Meteorology of Commonwealth of Independent States (CIS) which is attended by hydro-meteorological services of the following CIS member countries: Azerbaijan, Armenia, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Russia, Tajikistan, Turkmenistan, Uzbekistan, Ukraine.

The expo will showcase the following BARANI DESIGN Technologies sensors and micro-weather stations:

MeteoHelix® метеорологическая метеостанция (micro-weather station, AWOS)

Heated anemometer MeteoWind® 2 immediately after a strong icing event in the mountains of Slovakia.

Heated anemometer MeteoWind® 2 immediately after a strong icing event in the mountains of Slovakia.

MeteoShield® Professional protecting internal temperature and humidity sensors from the effects of icing.

MeteoShield® Professional protecting internal temperature and humidity sensors from the effects of icing.

BARANI DESIGN TECHNOLOGIES IS A MANUFACTURER OF PROFESSIONAL WEATHER STATIONS AND METEOHELIX PERSONAL WEATHER STATIONS.

BARANI DESIGN TECHNOLOGIES IS A MANUFACTURER OF PROFESSIONAL WEATHER STATIONS AND METEOHELIX PERSONAL WEATHER STATIONS.

BARANI DESIGN MeteoHelix® IoT weather stations for smart street lamps

Urban street lamp weather stations like the MeteoHelix® IoT Pro are able to produce research quality climate change data even in urban environments dominated by pavement and sun heated walls

Smart street lamp weather stations like the MeteoHelix® IoT Pro are able to produce research quality climate change data even in urban environments dominated by pavement and sun-baked walls.

Installations on lamp posts are ideal as they put distance between weather stations and sun-heated walls of buildings so that weather stations can do their job properly. While urban weather stations equipped with a helical MeteoShield® Professional are able to accurately measure air temperature even in direct sunlight with accompanying sun reflections and radiating heat sources, care must still be taken to choose an installation location representative of the environmental factors which one wants to measure.

Care must be taken to install urban weather stations such that artificially heated air does not feed directly into them. This will result in the measurements being dominated by hyper-local meteorological phenomenon. If one wants to measure the extremes of urban heat island effects, this will be acceptable, but if the goal is to quantify the urban climate over a larger area, lamp post and street light installations are an ideal choice.

The accompanying photos show a street lighting installation of a BARANI DESIGN Technologies MeteoHelix® IoT Pro and SEB50 rain gauge within an urban building complex.

MeteoHelix® Weather station installed on street lightning in a downtown park in the city of Bratislava

MeteoHelix® Weather station installed on street lightning in a downtown park in the city of Bratislava

Energy efficient LED street lamp with a MeteoHelix® weather station

BARANI DESIGN TECHNOLOGIES IS A MANUFACTURER OF PROFESSIONAL WEATHER STATIONS AND METEOHELIX PERSONAL WEATHER STATIONS

BARANI DESIGN TECHNOLOGIES IS A MANUFACTURER OF PROFESSIONAL WEATHER STATIONS AND METEOHELIX PERSONAL WEATHER STATIONS

 

MeteoHelix®, MeteoWind®, MeteoShield® will be featured at the IMD Meteorological Expo in St. Petersburg, Russia

Heated anemometer MeteoWind® 2 immediately after a strong icing event in the mountains of Slovakia.

Heated anemometer MeteoWind® 2 immediately after a strong icing event in the mountains of Slovakia.

BARANI DESIGN Technologies will have on hand the latest meteorological technologies for climate research at the WEATHER • CLIMATE • WATER / EARTH OBSERVATIONS / GREEN ECONOMY 2019 expo in St. Petersburg, Russia on October 9-10, 2019.

The exhibition will take place at the new Expoforum Convention Center in St. Petersburg, Russia, and will be supported by Roshydromet – Federal Service of Russia on Hydrometeorology and Environmental Monitoring.

The expo will showcase the following BARANI DESIGN products:

This exhibition is one of the world’s most significant in the field of hydrometeorology, environmental monitoring, earth observations and green economy for the republics of the former Soviet Union including:

MeteoShield® Professional protecting internal temperature and humidity sensors from the effects of icing

MeteoShield® Professional protecting internal temperature and humidity sensors from the effects of icing

  • Armenia

  • Azerbaijan

  • Belarus

  • Estonia

  • Georgia

  • Kazakhstan

  • Kyrgyzstan

  • Latvia

  • Lithuania

  • Moldova

  • Russia

  • Tajikistan

  • Turkmenistan

  • Ukraine

  • Uzbekistan

BARANI DESIGN Technologies AWOS weather station at 2000 meters in High Tatra mountains