Comfortably exceed all WMO/MEASNET/EPA standards

Dendriform elliptic cups provide high accuracy and consistency, and are extremely robust. Solid state speed sensor for consistently accurate data in all extreme weather conditions for early warning systems is the norm.

Robust easy to replace bearings and cups for easy field maintenance. Elliptical cup design offers large wind blown area for high torque and very-low starting speeds.

• Very low starting wind speed of less than 0.2 m/s

• Excellent linearity and accuracy meeting all MEASNET, EPA and World Meteorological Organization (WMO) measurement requirements.

• Excellent off-axis response with a very low distance constant.

• Flat elliptic cups offer resistance to snow buildup improve snow shedding over conical and spherical cups.

Analog outputs for compatibility with all existing meteorological data loggers.

Digital pulse output for wind speed with two pulses per revolution generated by solid state technology for consistent and clean wind speed signal.

Analog 0 V to 2.5 V wind direction signal generated also by solid state technology with a robust stainless steel reinforced FRP wind vane is compatible with all meteorological data loggers.

Elliptical cup shape

Patented elliptical design offers a larger wind blown area than circular and conical cups for higher aerodynamic torque to overcome bearing friction. Result is more consistent anemometer response throughout the complete air temperature range than ultrasonic anemometers.

Benefits

• Low starting speeds

• Long-term dirt, dust and sand resistance created by the use of larger bearings which offer long-term measurement stability not effected by dirt

• Reduces effects of rain and snow on anemometer linearity

• No bird damage problems

• Consistent data in all weather.

Elliptical cup cross-section

Aerodynamic stability in all-weather and throughout the complete wind speed range is a result of the elliptical cup cross section. Elliptical cup cross section is a very stable aerodynamic shape.

Benefits

• High full-scale linearity throughout the whole wind speed range

• Rain and dirt buildup on cups have minimal influence on measurement stability

• Flat elliptic cups reduce ability for snow buildup on anemometer cups

• Superb off-axis response for reliable data in turbulent environments

Enhanced reliability with solid state technology

• MTBF (Mean Time Between Failures) is 987,090 hrs (112 years) per MIL-SPEC: MIL-HDBK-217 F Notice 2 Parts Count section ANSI/VITA 51.1-2013 (R2018)

ICAO approved for airport use

• ICAO approved for all-weather airport use

• Enhanced winter operation for wireless airport wind monitoring

All metal wind direction vane

Efficient all metal design with superb response rate and good aerodynamic damping to prevent overshoots and reduce wind data noise. Held in place by two oversize stainless steel ball bearings for robustness and dirt resistance.

Benefits

• Fast response and low rotational inertia

• Low starting wind speed <0.2 m/s

• Long-term dirt, dust and sand resistance created by the use of two oversize bearings for long-term measurement stability and strength

• All-metal construction for strength and long life

Lightning protection

2-stage lightning protection against over-voltage, over-current, high speed voltage & current transients, and reverse polarity gives MeteoWind Compact electrical reliability.

Lightning protection meets the following international standards for industrial equipment safety: 

• EMC Emissions according to EN50081-1 / IEC61000-6-1

• EMI Transients according to EN50081-1 / IEC61000-6-2

• ESD 4000 V (4 kV)

Combined sensor advantage

• Two instruments for the price of one

• Lower power requirements than two separate instruments

• One sensor, one mount - simpler than two mounts for two sensors (anemometer & wind vane)

• Less cable, less connections & less electronics equals higher reliability

Accurate measurement

• Very low starting speed (< 0.2 m/s)

• Good full-scale linearity

• Very low distance constant (< 1 m) with minimal over-speeding

Technical features

• Rugged all-metal anodized aluminum housing and wind vane

• Tough fiber reinforced cups from FRP material

• Tough stainless steel reinforced FRP material wind vane

• Corrosion resistant anodized aluminum body

• Versatile analog sensor communication interface:

  • Solid state pulse wind speed output

  • Solid state analog lightning protected 0…2.5V voltage output for wind direction